Infrared Water Leak Detection

AMERICAN AIR TESTING
	Testing & removal strategies for toxic mold, odors, bacteria, sewage, asbestos and lead including infrared water leak detection and drying verification.

Toxic Mold
Bacteria – Sewage
Asbestos Testing
Odors
Water Leaks
       Infrared
       More Infrared
       Electric Panels

Tenant Information
Mold 101 for Real Estate
Air Purifiers
Cleaning Instructions (PDF)

Email John

John R. Riera
CIE,CMRS,CMC

Got a Mold Question?
Ask a Question

Free Phone Estimates!
415-337-2923

668 Madrid St.
PO Box 12479
San Francisco
California 94112-0479
415-337-2923
Fax: 415-593-7617

Water Leaks - Infrared

We use various methods in conjunction with the infrared camera to find the sources of water penetration.

We combine photos with an overview of the problems we discovered and, more importantly, suggestions on how to correct the problems.

Infrared leak detection can be done at the same time as microbial lab sampling.

This is an example:


The dark blue areas are wet as confirmed with a moisture meter. The source/s of the water intrusions are the deck posts attached to the exterior siding.

This example is from our report's Photos section. Guidance is given on how to correct these problems in the opening summery sections entitled What We Found and What You Need To Do.


Photo 1. Bottom of the middle window The wall and floor are wet below these windows. These area of moisture tested wet with a moisture meter and confirmed wet with the infrared photo shown above.


Photo 2. Top right window The ceiling area on both sides of this window is wet. These area of moisture tested wet with a moisture meter and confirmed wet with the infrared photo shown above..


Photo 3. Bottom right window before wetting The wall and floor below this window are wet. These area of moisture tested wet with a moisture meter and confirmed wet with the infrared photo shown above.